- Certified: EN54-2/4 (LPCB)
- Protocol: C-TEC CAST
- Mains: 230V AC, 50/60Hz, 350mA max
- PSU: 27V DC nominal, 1.4A max @ 230V AC
- Quiescent Current: 50mA (unloaded)
- Battery: 2 x 12V 3.2Ah VRLA (series)
- Loop Drivers: 1
- Max Loop Output: 500mA @ 40V
- Loop Length: Up to 1km
- Devices per Loop: Max 255
- Sounder Circuits: 2 (500m max each)
- Sounder Output: 400mA max
- EOL Resistor: 6.8kΩ, 0.25W
- Relays: 3 x programmable, 1 x fault relay (1A @ 30V DC)
- Aux Power: 24V DC (19.5–28V), 100mA max
- Inputs: 2 x programmable (0V trigger, 27V max)
- PC Connection: RS232 (via XFP507 kit), no printer
- Display: 2x40 backlit LCD, 16 zonal LEDs + system indicators
- Wiring: Max conductor size 1mm²
- Networking: Optional RS485 (XFP761), up to 8 panels/repeaters, 1km/500m max
- Size: 380 x 235 x 96mm
- Material: Plastic (RAL7035 textured)
- IP Rating: IP30
- Weight: 1.8kg (excl. batteries)
- Operating Temp: -5°C to +40°C, RH 95% max
- Price mentioned per piece
- Protocol: C-TEC CAST
- Mains Supply: 230V AC, 50/60Hz
- Rated Current: Max. 680mA
- Internal PSU: 27V DC nominal, 3A max @ 230V AC
- Quiescent Current: 100mA (2 unloaded loops)
- Battery: 2 x 12V 7Ah VRLA (in series)
- Loop Drivers: 2
- Loop Output: Max. 500mA @ 40V; Max. 1km loop length; 255 devices/loop
- Sounder Circuits: 2 conventional, 500m max length each
- Sounder Output: Max. 400mA
- EOL Resistor: 6.8kΩ, 0.25W (Blue-Grey-Red-Gold)
- Material: Metal
- IP Rating: TBC
- Weight: 4.5kg (excluding batteries)
- Operating Conditions: -5°C to +40°C; Max. 95% RH
- Relays:
3 x Programmable (via C&Es)
1 x Fault Relay (active = no faults)
SPCO, 1A @ 30V DC max
- Display/Indicators:
2x40 backlit LCD
32 Zonal LEDs
Fire, Fault, Pre-Alarm, Test, Disablement, etc.
- Connections: Max conductor size 1mm²
- Expansion:
Optional AFP711 card for RS485 networking
Up to 8 panels/repeaters, 1km (network), 500m (repeater)
- Dimensions:
Base: 410mm (W) x 250mm (H) x 80mm (D)
Lid: 439mm (W) x 274mm (H) x 7mm (D)
- Aux Power Output: 24V DC (19.5V–28V), 100mA max, resettable fuse protected
- Aux Inputs: 2 programmable (trigger to 0V), 27V max, non-latching
- PC Connection: RS232 via Molex (XFP507 kit); no printer support
- Price mentioned per piece
- Mains supply: 230V 50/60Hz.
- Mains rated current: 810mA max.
- Internal power supply: 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
- Total output current limited to: 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
- Quiescent current: 40mA (on mains fail). Zone quiescent 2mA max.
- Max battery size and type: 2 x 12V 7Ah VRLA connected in series.
- No. of detector zone circuits: 3 @ 19-28Vdc (Max. length per circuit is 250m).
- Max. devices per detector zone: 20 detectors (or 32 detectors/manual call points combined).
- No. of conventional sounder circuits: 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
- EOL resistor value: 6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
- Max. sounder output current: 3 x 200mA.
- Auxiliary relays: Six: (1) Fire;
(2) Local Fire;
(3) Extract Fan;
(4) 1st Stage;
(5) 2nd Stage;
(6) Fault. Volt free single pole changeover. Max. switch current 1A;
Max. switch voltage 30Vdc. Five additional relays
- Other outputs: Extinguishant release (21-28Vdc, rated at 1A for 5 mins).
Programmable to delay by 0-60 seconds;
to be active for 1-300 seconds and to flood for 60-1800 seconds.
- Auxiliary inputs: Six: (1) Manual Release;
(2) Flow Switch;
(3) Low Pressure;
(4) Mode;
(5) Hold;
(6) Abort. 8K-2KΩ normal;
1.8K-200Ω active;
150-0Ω short circuit.
EOL value: 6K8 +/-5%, 0.25W.
- Indicators: Multiple indicators are provided – refer to the EP203 instructions for details.
- Expansion connections: Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power)
and/or up to 8 x Ecomomy status units (2 wire power + 2 wire mode select).
- Product dimensions (mm): 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
- Construction & finish: Metal back box; metal chassis' plastic lid.
- IP Rating: IP30.
- Weight: 4.2kg (without batteries).
- Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%.
- Mains supply: 230V 50/60Hz.
- Mains rated current: 700mA max.
- Internal power supply: 27V nominal.
- Total output current limited to : 3A @ 230V.
- Quiescent current: 90mA
- Max battery size and type: 2 x 12V 7Ah VRLA connected in series.
- No. of detector zone circuits: 16 (Max. length per circuit is 500m).
Can be extended to 28 zones using FF501Z 4 Zone - extender PCB kits.
- Call point resistor value: 470 to 680Ω.
- Max. devices per detector zone: 20 detectors (max. detector current 2mA).
- No. of conventional sounder circuits: 4 (Max. length per circuit is 500m).
- EOL resistor value: 6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
- Max. sounder output current: 3mA (to all outputs). Outputs are fused at 1A.
- Auxiliary relays : 1 x onboard relay (1A, 30 VDC, follows sounders).
- Open collector outputs: 2 x Fire and 1 x Fault output available via optional FF574X expansion loom. Max. sink current 100mA.
- Auxiliary inputs: Class change input available via optional FF574X expansion loom.
- Indicators: Mains On;
Gen Fire;
Zone Fire;
Zone Fault (S/C, O/C, head out, Zone disabled);
Sndr Fault;
Processor Fault;
Batt/PSU Fault;
Aux O/Ps Disabled;
Fault Sounder (fault, silenced fire and delayed sndrs)
- Controls: External (key operated): Reset/Test Scroll;
Silence Alarm/Fault Sounders;
Evacuate;
Disable. Internal: OMT;
Sounder Walk Test;
Sounder Isolate;
Sounder Delay;
S/C equals fire;
Non-latching zones.
- Product dimensions (mm): 521 W x 334 H x D 140mm.
- Construction & finish: Metal lid and base.
- IP Rating: IP30.
- Weight: 9.5kg.
- Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%.
- Quiescent current: 0mA (none).
- Alarm current: Determined by the type of control equipment and
- number / type of field devices connected to the system.
- Controls: Green button.
- Product dimensions (mm): 87 H x 87 W x 58 D mm. Surface or flush mounting.
- Construction & finish: Polycarbonate. Green push button, yellow call point housing, black back box.
- IP Rating: IP24.
- Weight: TBC
- Operating conditions/temperature: -0ºC to +65ºC. Max. relative humidity 95% non-condensing
- Connection Details: See Instruction manual
- Cable Termination: 0.5-2.5mm2
- Maximum Voltage: 30VDC
- Current Rating (switch only): 2 Amps
- Humidity: 93± 3% non-condensing
- Operating Temperature: -100C to +550C
- Storage Temperature: -100C to +550C
- Ingress Protection (IP) Rating: IP24D
- Material: Polycarbonate PC/ABS Acrylonitrile Butadiene Styrene
- Weight: 180g
- Colour: Red
- Price mentioned per piece
- Material & Seal: Silicone facepiece with trough seal
- Lens: Wide polycarbonate, impact/chemical resistant
- Valve: Cool Flow exhalation valve
- Connection Type: 6000 Series bayonet system
- Compatible Filters: Gas/vapor, particulate, combo cartridges
- Weight:~400 g
- Standards: ANSI Z87.1-2010; NIOSH; APF 50
- Fit System: 4-point adjustable head harness
- Extended Configurations: Compatible with PAPR & supplied air systems
- Price Mentioned Per Piece
- Upper : High Quality Cow Suede Leather
- Lining : Breathable Sandwich Air Mesh
- Insole : Comfortable EVA Coated Mesh
- Outsole : Heavy Duty PU/PU Dual Density
- Toecap : Composite Toecap
- Penetration : Kevlar Midsole Plate
- Standard: CE EN ISO 20345:2011 S1P SRC
- Application : Construction, Logistics, Mechanics,
- Glasses Installation, Factory Workshop, Garage etc
- Shoes Weight : 1.1-1.2 KGS /Pair
- Price Mentioned per pair
- Product Name: 3M™ Aura 9332 FFP3 Disposable Particulate Respirator.
- Filter Class: FFP3 (highest particulate protection under EN 149).
- Protection: Solid & liquid particulates (dust, mists, fumes) including chemical aerosols.
- Design: Three‑panel, foldable mask with advanced filter media.
- Materials: Multi‑layer non‑woven filter and supportive inner layers.
- Use: Disposable, single‑use respiratory protection.
- Standard : CE 0086, EN 149:2001, NIOSH.
- Price mentioned per piece
- Protection Type: Organic vapours (>65 °C), inorganic/acid gases, ammonia, methylamine (ABEK1)
- Compatibility: 3M 6000, 6500QL, 7500 Series Half Masks; FF-400 Full Masks
- Connection: 3M Bayonet (quick-click attachment)
- Design: 110 g; trapezoidal shape; low breathing resistance
- Certifications: EN 14387:2004+A1:2008, AS/NZS 1716/1715
- Price Mentioned Per Pair
- Electrical Hazard EH Rated : 18KV Tested by ASTM
- Upper : Waterproof Smooth Cow Leather
- Lining : Ventilate Sandwich Air Mesh
- Insole : EVA Coated Mesh Insole
- Outsole : Dual-Density Polyurethane/Rubber Injection (HRO 300°)
- Toecap : Composite Toe Cap
- Penetration : Flexible Kevlar Midsole Plate
- Standard: CE EN ISO 20345:2011 SBP+I SRC
- Suitable Application : suitable for various industries such as Construction, Logistics, Mechanics, Glasses Installation, Workshop, Oil & Gas, Chemical Factory, etc.
- Price mentioned per pair
- Face Seal Material: Soft silicone for enhanced fit and comfort
- Exhalation Valve: 3M Cool Flow™ for reduced heat and moisture
- Head Harness: Dual-mode (standard or drop-down) for convenience
- Filter Compatibility: Supports 3M series: 2000, 5000, 7000 filters & 6000 cartridges
- System Integration: Can connect to 3M powered air systems (TR-600, TR-800) and Dual Airline systems
- Build & Maintenance: Durable components, spare parts available, includes storage bag
- Certified Protection: NIOSH-approved; offers APF of 10 in air-purifying mode
- Price Mentioned Per Piece
- Weight : 6.8 kg
- Dimensions : 52 × 31.5 × 38.5 in
- Color : Green
- Origin : Pakistan
- Packing : 50 Pieces / Box
- Price Mentioned per box
- ATPV 40 cal/cm² (CAT 4) protection.
- NFPA 70E, IEC 61482-2, EN ISO 11612 certified.
- Patented FR fabric: Meta-Aramid & Para-Aramid blend.
- Lightweight – 18% less weight.
- Flame-resistant & self-extinguishing.
- Quilted OPAN & Para-Aramid liner.
- Durable zip & snap front closure.
- Knitted cuffs for secure fit.
- Lift Front Hood with 109% wider vision.
- Ventilated design for heat release.
- Dark color hides stains.
- Includes coat, bib, hood, helmet, glasses & SK bag.
- Upper : High Quality Water Resistant Cow Leather
- Lining : Breathable Sandwich Air Mesh
- Insole : Comfortable EVA Coated Mesh
- Outsole : Heavy Duty PU/PU Dual Density
- Toecap : Steel Toecap
- Penetration : Steel Midsole Plate
- Standard: CE EN ISO 20345:2011 S3 SRC
- Application : Construction, Logistics, Mechanics, Glasses Installation, Factory Workshop, Garage etc.
- Price mentioned per pair
- Belt color: Red or Blue.
- Material: Stainless steel.
- Total height: 35".
- Pole diameter: 2.5".
- Base diameter: 13".
- Belt length: 78".
- Belt width: 2".
- Package includes: 1 x Retractable posts.
- Price mentioned per piece.