Close
You have no items in your shopping cart.
Search
3 Items in Grid 4 Items in Grid List

TNA TX7100 Optical Smoke Head for Addressable Fire Alarm Systems

Specifications:

- Compliance: EN 54-7:2000 +A1:2002 +A2:2006, LPCB / CE-CPR.

- Operating Voltage: 24 V DC (16 – 28 V DC).

- Current (Standby / Alarm): 0.6 mA / 4 mA.

- Address Range: 1 – 254 (TNA protocol).

- Indicator: Single 360° red LED.

- Material / Finish: ABS, white glossy.

- Dimensions: (Ø × H): 99.7 mm × 57 mm.

- Weight: 145 g (with base) / 90 g (without).

- Operating Temp.: –10 °C to +50 °C.

- Humidity: 0 – 95 % RH, non-condensing.

Contact us For Quote

TNA TXC7301 Conventional Sounder & Strobe Combined Fire Alarm Device

Specifications:

Power Supply Voltage: DC 24V (Acceptable Range: 15–28VDC)

Standby Current:<10.0 mA

Sound Output: 75–105 dB @ 3 meters (escalates in 3–5 seconds)

Flash Frequency: 1.0 Hz – 1.8 Hz

Sound Cycle Duration: 2.5 – 4.5 seconds

Wiring Polarity: Required (polarity-sensitive)

Operating Temperature Range: -10°C to +50°C

Humidity Tolerance: ≤ 95% RH, non-condensing

Material / Color: ABS Plastic / Red or White

Dimensions (with Base): Ø100mm x 44mm (H)

Weight Approx.: 108g (including base)

Contact us For Quote

TNA TXC7130 Conventional Reflective Beam Detector 8-100 m

Specifications:

- Standard Compliance: EN 54-12:2015 (LPCB / CE-CPR Certified)

- Power Rating: 20V to 28V DC

- Current Consumption: Standby: 23mA, Commissioning: 56mA, Alarm: 33mA

- Beam Type Reflective: Infrared with Laser Pointer

- Alignment Guide: Laser Beam & Nixie Tube Digital Display

- LED Indicators: Red (Fire), Yellow (Fault), Green (Alignment)

- Material / Color: ABS Plastic / White

- Dimensions: 190.87mm (L) × 126.87mm (W) × 91.96mm (H)

- Weight: 0.13 kg (Detector Only), 440g (With Base)

- Operating Temperature: -10°C to +50°C

- Humidity Range: 0% to 95% RH (Non-condensing)

- Ingress Protection: IP30 (Optional IP66 with glue seal – not EN54-12 approved)

Contact us For Quote

TNA TX7140 Intelligent Addressable Manual Call Point

Specifications:

- Compliance: EN 54-11:2001 + A1:2005

- Certifications: LPCB / CE-CPR

- Input Voltage: 24VDC (Range: 16V – 28V)

- Current Consumption: Standby: 0.6 mA / Alarm: 1.8 mA

- Protocol / Addressing: T&A, Range: 1 to 254

- Indicator: Front-Facing LED (Steady On when pressed)

- Glass Type: Non-breakable (No hammer required)

- Material / Finish: Fireproof ABS / Red Glossy

- Mounting: Surface Mount, Type A (Indoor Use)

- Dimensions: 99.7 mm × 57 mm

- Weight: 145 g (with base) / 90 g (without base)

- Operating Temperature: –10 °C to +50 °C

- Ingress Protection: IP43

- Humidity Range: 0 – 95% RH (Non-condensing)

Contact us For Quote

TNA TXC7141 Conventional Manual Call Point

Specifications:

Power Supply Voltage: 24VDC (Acceptable Range: 16~28VDC)

Normal Current: ≤ 20µA

Alarm Current: ≤ 30mA

Output Contact Rating: DC 30V / 0.1A Passive Contact; Contact Resistance ≤ 100mΩ

Activation Method: Manual Press of Plastic Dome

Reset Method: Key Reset (Rotate 90° to Right with Special Key)

Indicators: Fire Alarm: Red (On in Alarm)

Work Status: Red (Blinking)

Wiring Type: 2-wire, Non-polarized

Operating Temperature: -10°C to +55°C

Humidity: ≤ 95% RH (Non-condensing)

Material / Color: Plastic / Red

Dimensions: 90 × 90 × 34 mm (with base)

Mounting Hole Distance: 60 mm

Contact us For Quote

TNA TX7932 Handheld Fire Alarm Device Programmer Read Write and Erase

Specifications:

- Battery Requirement: 2 × 1.5V AA Batteries (Included)

- USB Power Supply: Micro-USB Interface

- Current Consumption Standby: 0μA / In Use: 20mA

- Protocol: T&A Protocol

- Material / Colour: ABS Plastic / Grey Glossy Finish

- Dimensions: (L × W × H) 135mm × 60mm × 30mm

- Humidity Tolerance: 0–95% Relative Humidity, Non-Condensing

- Auto Power-Off: After 3 minutes of inactivity

Contact us For Quote
Close
Filter by Clear All
Min: PKR 0.00 Max: PKR 315000.00
Rs0 Rs315000