Close
0 items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Resmed AirFit F20 Full Face CPAP Mask

    PKR 9500.00
    -Fewer Facial Touchpoints

    -QuietAir Elbow Reduces Noise

    -Wide Open Field of Vision

    This Product Includes...

    • 1 Headgear
    • 1 Mask Frame
    • Package Contents: Mask 
    • Contains Latex? No, cushion is made from silicone.
    • Headgear Dimensions (Upper Straps): 6 in L
    • Headgear Dimensions (Lower Straps): 11.75 in L
    • Headgear Weight: 0.93 oz
    • Cushion Dimensions (Large): 4.75 in L x 3.25 in W x 2.5 in H
    • Cushion Weight (Large): 1.50 oz
    • Mask with Headgear Weight: 4.19 oz
    • Mask without Headgear Weight: 3.26 oz
    • Material Components (Cushion Assembly): Silicone Elastomer and Polycarbonate
    • Material Components (Elbow Assembly): Polyamide, Silicone Elastomer, Polycarbonate, and Polybutylene Terephthalate
    • Material Components (Frame Assembly): Polyester Elastomer, Polycarbonate, Nylon/Elastane, and Metal Plated Magnet
    • Material Components (Headgear): Nylon/Elastane, Polyurethane, and Polyamide
    • Material Components (Headgear Clip): Polycarbonate and Metal Plated Magne
    • Tips & Tricks for Obtaining the Best Fit

      1. Remove all packaging from the mask, headgear, and elbow.
      2. Detach the magnetic headgear clips from the base of the cushion, if applicable.
      3. With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
      4. Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
      5. With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
      6. Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
      7. Then adjust the bottom headgear straps in the same manner, if needed.
      8. Join the air tube and elbow together to form one piece.
      9. Insert the elbow into the round opening on the full face cushion, and attach the CPAP hose to the elbow.

    This Product Includes...

    • 1 Headgear
    • 1 Mask Frame
    • Package Contents: Mask 
    • Contains Latex? No, cushion is made from silicone.
    • Headgear Dimensions (Upper Straps): 6 in L
    • Headgear Dimensions (Lower Straps): 11.75 in L
    • Headgear Weight: 0.93 oz
    • Cushion Dimensions (Large): 4.75 in L x 3.25 in W x 2.5 in H
    • Cushion Weight (Large): 1.50 oz
    • Mask with Headgear Weight: 4.19 oz
    • Mask without Headgear Weight: 3.26 oz
    • Material Components (Cushion Assembly): Silicone Elastomer and Polycarbonate
    • Material Components (Elbow Assembly): Polyamide, Silicone Elastomer, Polycarbonate, and Polybutylene Terephthalate
    • Material Components (Frame Assembly): Polyester Elastomer, Polycarbonate, Nylon/Elastane, and Metal Plated Magnet
    • Material Components (Headgear): Nylon/Elastane, Polyurethane, and Polyamide
    • Material Components (Headgear Clip): Polycarbonate and Metal Plated Magne
    • Tips & Tricks for Obtaining the Best Fit

      1. Remove all packaging from the mask, headgear, and elbow.
      2. Detach the magnetic headgear clips from the base of the cushion, if applicable.
      3. With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
      4. Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
      5. With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
      6. Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
      7. Then adjust the bottom headgear straps in the same manner, if needed.
      8. Join the air tube and elbow together to form one piece.
      9. Insert the elbow into the round opening on the full face cushion, and attach the CPAP hose to the elbow.